Netgear NETGEAR Manual Do Utilizador

8-36

Switching Commands

This command is used to set the Management VLAN.

This command configures the Management VLAN ID. 

1

This chapter provides a detailed explanation of the System configuration commands. The 
commands are divided into two functional groups:

•

Show commands display switch settings, statistics, and other information. 

•

Configuration commands configure features and options of the switch. For every 
configuration command, there is a show command that displays the configuration setting.

This command adds one port to the port-channel (LAG). The first interface is a 
logical slot and port number of a configured port-channel.

Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’ 

command.

addport <logical slot/port>

This command enables automatic negotiation on a port. The default value is enable.