Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-91
202-10088-01, March 2005
Format
option <code> {ascii string | hex <string1>
[<string2>...<string8> ] | ip <address1>
[<address2>...<address8> ]}
Mode
DHCP Pool Config
no option
This command removes the options.
Format
no option <code>
Mode
DHCP Pool Config
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [address]
Modes
Privileged EXEC
User EXEC
IP address
The IP address of the client.
Hardware Address
The MAC Address or the client identifier.
Lease expiration
The lease expiration time of the IP Address assigned to the client.
Type
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Modes
Privileged EXEC
User EXEC
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping Packets
The maximum number of Ping Packets that will be sent to verify
that an ip address id not already assigned.
that an ip address id not already assigned.