Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-96
Switching Commands
202-10088-01, March 2005
Default
0
Format
vlan priority <priority>
Mode
Interface Config
GARP Commands
This chapter provides a detailed explanation of the GARP commands. The commands are divided
into two functional groups:
into two functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
configuration command, there is a show command that displays the configuration setting.
set garp timer join
This command sets the GVRP join time per port and per GARP. Join time is the interval between
the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership
for a VLAN or multicast group.
the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership
for a VLAN or multicast group.
This command has an effect only when GVRP is enabled. The time is from 10 to 100
(centiseconds). the value 20 centiseconds is 0.2 seconds.
(centiseconds). the value 20 centiseconds is 0.2 seconds.
Default
20
Format
set garp timer join <10-100>
Mode
Interface Config
no set garp timer join
This command sets the GVRP join time per port and per GARP to 20 centiseconds (0.2 seconds).
This command has an effect only when GVRP is enabled.
This command has an effect only when GVRP is enabled.
Format
no set garp timer join
Mode
Interface Config