Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-99
202-10088-01, March 2005
Note: This command has an effect only when GVRP is enabled
.
Format
no set garp timer leaveall
Mode
Interface Config
set garp timer leaveall all
This command sets how frequently
Leave All PDUs
are generated for all ports. A
Leave All PDU
indicates that all registrations will be unregistered. Participants would need to rejoin in order to
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
Note: This command has an effect only when GVRP is enabled
.
Default
1000
Format
set garp timer leaveall all <200-6000>
Mode
Global Config
no set garp timer leaveall all
This command sets how frequently
Leave All PDUs
are generated for all ports to 1000 centiseconds
(10 seconds). .
Note:
This command has an effect only when GVRP is enabled.
Format
no set garp timer leaveall all
Mode
Global Config
show garp
This command displays Generic Attributes Registration Protocol (GARP) information.
Format
show garp
Mode
Privileged EXEC and User EXEC
GMRP Admin Mode
This displays the administrative mode of GARP Multicast Registration Protocol
(GMRP) for the system.
(GMRP) for the system.
GVRP Admin Mode
This displays the administrative mode of GARP VLAN Registration Protocol
(GVRP) for the system
(GVRP) for the system