Netgear NETGEAR Manual Do Utilizador

Switching Commands

8-113

 

This indicates whether or not IGMP Snooping Fast-leave is active on the

 

VLAN.

The Group Membership Interval time is the amount of time in 

seconds that a switch will wait for a report from a particular group on a particu-
lar interface, which is participating in the VLAN, before deleting the interface 
from the entry.This value may be configured

This displays the amount of time the switch will wait after sending a query on an 
interface, participating in the VLAN, because it did not receive a report for a 
particular group on that interface. This value may be configured.

If a query is not received on an interface, participating 

in the VLAN, within this amount of time, the interface is removed from the list 
of interfaces with multicast routers attached. This value may be configured.

This section provides a detailed explanation of the LAG commands. The LAG feature initially 
load balances traffic based upon the source and destination MAC address. If an ARP entry is 
learned on the LAG then the LAG is converted to load balance based upon source/destination IP 
address. 

The commands are divided into two functional groups:

•

Show commands display switch settings, statistics, and other information. 

•

Configuration commands configure features and options of the switch. For every 
configuration command, there is a show command that displays the configuration setting.

This command enables the support of port-channels (static link aggregations - LAGs) on the 
device. By default, the static capability for all port-channels is disabled.

disabled