Netgear NETGEAR Manual Do Utilizador

Switching Commands

8-133

This command sets the MSTP Max Hops parameter to a new value for the common and internal 
spanning tree. The max-hops value is a range from 1 to 127.

20

This command sets the Bridge Max Hops parameter for the common and internal spanning tree to 
the default value.

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree 
instance or in the common and internal spanning tree. If the <mstid> parameter corresponds to an 
existing multiple spanning tree instance, then the configurations are done for that multiple 
spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the <mstid>, 
then the configurations are performed for the common and internal spanning tree instance.

If the ‘cost’ token is specified, this command sets the path cost for this port within a multiple 
spanning tree instance or the common and internal spanning tree instance, depending on the 
<mstid> parameter. The pathcost can be specified as a number in the range of 1 to 200000000 or 
auto.  If "auto" is specified, the pathcost value will be set based on Link Speed.

If the ‘external-cost’ token is specified, this command sets the external-path cost for MST instance 
‘0’ i.e. CIST instance. The external pathcost can be specified as a number in the range of 1 to 
200000000 or auto.  If "auto" is specified, the external pathcost value will be set based on Link 
Speed.