Netgear NETGEAR Manual Do Utilizador

Security Commands

9-5

This command displays the source MAC address of the last packet that was discarded on a locked 
port.

MAC Address of discarded packet on locked port.

This section provides a detailed explanation of the 802.1x commands. The commands are divided 
into the following groups: 

•

Configuration commands are used to configure features and options of the switch. For every 
configuration command there is a show command that will display the configuration setting.

•

Show commands are used to display switch settings, statistics and other information. 

This command creates an authentication login list. The <

is any character string and is 

not case sensitive. Up to 10 authentication login lists can be configured on the switch. When a list 
is created, the authentication method “local” is set as the first method. 

When the optional parameters “Option1”, “Option2” and/or “Option3” are used, an ordered list of 
methods are set in the authentication login list. If the authentication login list does not exist, a new 
authentication login list is first created and then the authentication methods are set in the 
authentication login list. The maximum number of authentication login methods is three. The 
possible method values are 

and

.

The value of 

 indicates that the user’s locally stored ID and password are used for 

authentication. The value of 

 indicates that the user’s ID and password will be authenticated 

using the RADIUS server. The value of 

indicates the user is never authenticated.

To authenticate a user, the authentication methods in the user’s login will be attempted in order 
until an authentication attempt succeeds or fails

.

Note: The default login list included with the default configuration can not be changed.