Netgear NETGEAR Manual Do Utilizador
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-12
Routing Commands
202-10088-01, March 2005
Link Speed Data Rate Is an integer representing the physical link data rate of the speci-
fied interface. This is measured in Megabits per second (Mbps).
MAC Address
Is the burned in physical address of the specified interface. The
format is 6 two-digit hexadecimal numbers that are separated by
colons.
format is 6 two-digit hexadecimal numbers that are separated by
colons.
Encapsulation Type
Is the encapsulation type for the specified interface. The types
are: Ethernet or SNAP.
are: Ethernet or SNAP.
show ip interface brief
This command displays summary information about IP configuration settings for all ports in the
router. This command takes no options.
router. This command takes no options.
Format
show ip interface brief
Mode
Privileged EXEC and User EXEC
Slot/Port
Valid slot and port number separated by forward slashes.
IP Address
The IP address of the routing interface in 32-bit dotted decimal
format.
format.
IP Mask
The IP mask of the routing interface in 32-bit dotted decimal for-
mat.
mat.
Netdir Bcast
Indicates if IP forwards net-directed broadcasts on this interface.
Possible values are Enable or Disable.
Possible values are Enable or Disable.
MultiCast Fwd
Indicates the multicast forwarding administrative mode on the
interface. Possible values are Enable or Disable.
interface. Possible values are Enable or Disable.
In Access Mode
Indicates the inbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.
on this interface. Possible values are Enable or Disable.
Out Access Mode
Indicates the outbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.
on this interface. Possible values are Enable or Disable.
show ip route
This command displays the entire route table. This commands takes no options.
Format
show ip route
Mode
Privileged EXEC
Network Address
Is an IP address identifying the network on the specified inter-
face.
face.