Netgear NETGEAR Manual Do Utilizador

Routing Commands

10-21

Displays the advertise mode which indicates whether router dis-
covery is enabled or disabled on this interface.

Displays the maximum advertise interval which is the maximum 
time allowed between sending router advertisements from the 
interface in seconds.

Displays the minimum advertise interval which is the minimum 
time allowed between sending router advertisements from the 
interface in seconds.

Displays advertise lifetime which is the value of the lifetime field 
of the router advertisement sent from the interface in seconds.

Displays the preference of the address as a default router address, 
relative to other router addresses on the same subnet.

This chapter provides a detailed explanation of the Virtual LAN Routing commands. The 
commands are divided by functionality into the following different groups:

•

Show commands are used to display switch settings, statistics and other information. 

•

Configuration Commands are used to configure features and options of the switch. For every 
configuration command there is a show command that will display the configuration setting.

•

Copy commands are used to transfer configuration and informational files to and from the 
switch. 

This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094. 

This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.