Netgear NETGEAR Manual Do Utilizador

Página de 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software 
10-26
Routing Commands
202-10088-01, March 2005
no ip rip authentication 
This command sets the default RIP Version 2 Authentication Type.
Format  
no ip rip authentication
Mode  
Interface Config
ip rip receive version 
This command configures the interface to allow RIP control packets of the specified version(s) to 
be received. 
The value for <mode> is one of: rip1 to receive only RIP version 1 formatted packets, rip2 for RIP 
version 2, both to receive packets from either format, or none to not allow any RIP control packets 
to be received. 
Default  
both
Format  
ip rip receive version {rip1 | rip2 | both | none}
Mode  
Interface Config
no ip rip receive version 
This command configures the interface to allow RIP control packets of the default version(s) to be 
received. 
Format  
no ip rip receive version
Mode  
Interface Config
ip rip send version 
This command configures the interface to allow RIP control packets of the specified version to be 
sent. 
The value for <mode> is one of: rip1 to broadcast RIP version 1 formatted packets, rip1c (RIP 
version 1 compatibility mode) which sends RIP version 2 formatted packets via broadcast, rip2 for 
sending RIP version 2 using multicast, or none to not allow any RIP control packets to be sent. 
Default  
rip2
Format  
ip rip send version {rip1 | rip1c | rip2 | none}
Mode  
Interface Config