Netgear NETGEAR Manual Do Utilizador
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
11-6
Quality of Service (QoS) Commands
202-10088-01, March 2005
no access-list
This command deletes an ACL that is identified by the parameter <
accesslistnumber>
from the
system
.
Format
no access-list <accesslistnumber>
Mode
Global Config
ip access-group
This command attach a specified access-control list to an interface.
Default
none
Format
ip access-group <accesslistnumber> <in | out>
Mode
Interface Config
ip access-group all
This command attach a specified access-control list to all interfaces.
Default
none
Format
ip access-group all <accesslistnumber> <in | out>
Mode
Global Config
show ip access-lists
This command displays an Access Control List (ACL) and all of the rules that are defined for the
ACL. The <
ACL. The <
accesslistnumber>
is the number used to identify the ACL.
Format
show ip access-lists <accesslistnumber>
Mode
Privileged EXEC and User EXEC
Rule Number
This displays the number identifier for each rule that is defined
for the ACL.
for the ACL.
Action
This displays the action associated with each rule. The possible
values are Permit or Deny.
values are Permit or Deny.
Protocol
This displays the protocol to filter for this rule.
Source IP Address
This displays the source IP address for this rule.