Netgear NETGEAR Manual Do Utilizador

Quality of Service (QoS) Commands

11-45

tail-drop queue-parms <queue-id-1> [<queue-id-2> … <queue-id-n>] threshold <0-16> <0-16> 
<0-16>

no tail-drop queue-parms <queue-id-1> [<queue-id-2> … <queue-id-n>]

This command specifies the maximum transmission bandwidth limit for the interface as a whole.  
Also known as rate shaping, this has the effect of smoothing temporary traffic bursts over time so 
that the transmitted traffic rate is bounded.  Use the 'no' form of this command to restore the 
default interface shaping rate value.

traffic-shape <bw>

no traffic-shape

This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a 
specific interface. The slot/port parameter is optional and is only valid on platforms that support 
independent per-port class of service mappings.  If specified, the 802.1p mapping table of the 
interface is displayed.  If omitted, the most recent global configuration settings are displayed.

The following information is repeated for each user priority.

The 802.1p user priority value.

The traffic class internal queue identifier to which the user prior-
ity value is mapped.