Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
6-6
Quick Start up
202-10088-01, March 2005
Quick Start up Downloading from TFTP Server
Before starting a TFTP server download, the operator must complete the Quick Start up for the IP
Address.
Address.
Quick Start up Factory Defaults
Table 6-7.
Quick Start up Downloading from TFTP Server
Command
Details
copy <url> {nvram:startup-config |
system:image}
Sets the download datatype to be an image
or config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads
the config file using tftp and system:image
option downloads the code file.
or config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads
the config file using tftp and system:image
option downloads the code file.
Table 6-8.
Quick Start up Factory Defaults
Command
Details
clear config
Enter yes when the prompt pops up to clear all the configurations
made to the switch.
made to the switch.
copy system:running-config
nvram:startup-config
nvram:startup-config
Enter yes when the prompt pops up that asks if you want to save
the configurations made to the switch.
the configurations made to the switch.
reload OR Cold Boot the Switch
Enter yes when the prompt pops up that asks if you want to reset
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.