Netgear XS712T-100NES Manual Do Utilizador
134
XS712T Smart Switch
Note:
IEEE 802.1D recommends a default of 300 seconds, which is the
factory default.
factory default.
3.
Click Apply.
Address Table
The MAC Address Table contains information about unicast entries for which the switch has
forwarding and filtering information. This information is used by the transparent bridging
function in determining how to propagate a received frame. Use the search function of the
MAC Address Table screen to display information about the entries in the table.
forwarding and filtering information. This information is used by the transparent bridging
function in determining how to propagate a received frame. Use the search function of the
MAC Address Table screen to display information about the entries in the table.
To search for an entry in the MAC address table:
1.
Select Switching
Address Table
Advanced
Address Table
.
2.
Use the Search By field to search for MAC Addresses by MAC Address, VLAN ID, or
Interface
Interface
.
•
MAC Address
. Select MAC Address from the menu and enter a six-byte
hexadecimal MAC address in two-digit groups separated by colons, then click Go. If
the address exists, that entry will be displayed. An exact match is required.
the address exists, that entry will be displayed. An exact match is required.
•
VLAN ID
. Select VLAN ID from the menu, enter the VLAN ID, for example, 100. Then
click Go. If any entries with that VLAN ID exist they are displayed.