Netgear XS712T-100NES Manual Do Utilizador
16
XS712T Smart Switch
To access the management interface form the Smart Control Center:
1.
Open a web browser.
2.
Enter the IP address of the switch in the address field of the browser.
Understand the User Interfaces
The XS712T Smart Switch software includes a set of comprehensive management functions
for configuring and monitoring the system by using one of the following methods:
for configuring and monitoring the system by using one of the following methods:
•
Web user interface
•
Simple Network Management Protocol (SNMP)
Each of the standards-based management methods allows you to configure and monitor the
components of the XS712T Smart Switch software. The method you use to manage the
system depends on your network size and requirements, and on your preference.
components of the XS712T Smart Switch software. The method you use to manage the
system depends on your network size and requirements, and on your preference.
This manual describes how to use the web-based interface to manage and monitor the
system.
system.
Use the Web Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
requirements:
•
HTML version 4.0, or later
•
HTTP version 1.1, or later
•
Java Runtime Environment 1.6 or later
To log on to the Web interface:
1.
Open a web browser and enter the IP address of the switch in the web browser address
field.
The login screen displays.
2.
Type the password in the Password field.
The factory default password is password. Passwords are case-sensitive.
3.
Click Login.
After the system authenticates you, the System Information screen displays.
The following figure shows the layout of the Smart Switch web interface.