Netgear XS712T-100NES Manual Do Utilizador

User-defined fields can contain 1 to 159 characters, unless otherwise noted in the field label 
on the configuration screen. All alphanumeric and special characters can be used except for 
the following (unless specifically noted for that feature):

\

Backslash

/

Forwards slash

*

Asterisk

?

Question mark

<

Less than

>

Greater than

|

Pipe

Use SNMPv3

The XS712T Smart Switch software supports the configuration of SNMP groups and users 
that can manage traps that the SNMP agent generates.

The XS712T Smart Switch use both standard public MIBs for standard functionality and 
private MIBs that support additional switch functionality. All private MIBs begin with a hyphen 
(-) prefix. The main object for interface configuration is in -SWITCHING-MIB, which is a 
private MIB. Some interface configurations also involve objects in the public MIB, IF-MIB.

SNMP is enabled by default. The System Information screen, which is the screen that 
displays after a successful login, displays the information you need to configure an SNMP 
manager to access the switch. To configure information for SNMPv1 or SNMPv2, see 

on page 53.

Any user can connect to the switch using the SNMPv3 protocol, but for authentication and 
encryption, the switch supports only one user which is admin; therefore there is only one 
profile that can be created or modified.