Netgear XS712T-100NES Manual Do Utilizador

IP Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the 
selected interface. Use the IP Binding Configuration screen to assign ACL lists to ACL 
Priorities and Interfaces. 



Select Security 



 > Advanced 



.

 

 

Select an existing IP ACL in which you want to add an IP ACL interface binding from the 
ACL ID

 menu.

The packet filtering direction for ACL is Inbound, which means the IP ACL rules are 
applied to traffic entering the port.

Specify an optional sequence number to indicate the order of this access list relative to other 

access lists already assigned to this interface and direction. 

A low number indicates high precedence order. If a sequence number is already in use 
for this interface and direction, then the specified access list replaces the currently 
attached access list using that sequence number. If the sequence number is not specified 
by the user, then a sequence number that is one greater than the highest sequence 
number currently in use for this interface and direction will be used. The valid range is 
1–4294967295.

Click the appropriate orange bar to expose the available ports or LAGs. 

To add the selected ACL to a port or LAG, click the box directly below the port or LAG 
number so that a 

check mark 

displays in the box.

To remove the selected ACL from a port or LAG, click the box directly below the port 
or LAG number to clear the selection. A check mark in the box indicates that the ACL 
is applied to the interface.

Click Apply.