Netgear WFS709TP Manual Do Utilizador

Configuring AAA Servers

6-3

4. Set the Mode to Enable to activate the authentication server.

5. Click Apply to apply the configuration.

To edit or delete a RADIUS Server entry, click Edit or Delete in the Action column of the 
RADIUS server entry.

•

If you are editing the entry, enter your changes, then click Apply to save the configuration.

•

If you are deleting the entry, a pop-up window displays the message “Are you sure you want to 
delete the RADIUS server <server_name>?” Click OK to delete the entry.

You can create entries in an internal database that can be used to authenticate users. The internal 
database contains a list of users along with the password for each user. When you configure the 
WFS709TP as the primary server, user information in incoming authentication requests is checked 
against the internal database.

To add a user to the internal database:

1. Collect the following information required for internal database entries (

Note: When you configure a server, you can set the VLAN for users based on 

attributes returned for the user during authentication. These values take 
precedence over the default VLAN configured for the user. See 

 for more information.

User Name

User name (mandatory field)

Password

Password (mandatory field)

E-mail

E-mail address of the user

Entry does not expire/
Expiration

No expiration on user entry, expiration duration (in minutes), or specific 
time and date of expiration.
If an expiration is configured for the user, the user is disconnected at 
the expiration of the account. To continue network access, a user will 
need to authenticate using an unexpired account.