RuggedCom RS1600 Manual Do Utilizador
RuggedSwitch
™ User Guide
Shutdown Time
This is the length of time to shut the port down when an unauthorized frame is
received in port security mode.
received in port security mode.
If this option is set to “Don’t Shutdown”, the frame will simply be filtered.
If this option is set to “Until Reset”, the port will be shutdown until a port reset
command is issued or the switch is reset.
command is issued or the switch is reset.
This option can also take the number of seconds (1 to 86384) to hold the port
down.
down.
Note:
The port is also reset whenever a parameter in the Port Configuration and Status menu
is changed.
Status
This parameter’s message describes the port security status including disabled
ports and ports that have been shut down because of security violations. If
autolearning is configured, this parameter displays whether it is taking place. The
number of entries in the Static MAC Address table for this port is also provided.
ports and ports that have been shut down because of security violations. If
autolearning is configured, this parameter displays whether it is taking place. The
number of entries in the Static MAC Address table for this port is also provided.
Port Mirroring Menu
The Configure Port Mirroring command enables port mirroring.
Figure 16: Port Mirroring Menu
My Switch Port Mirroring Admin Access
Port Mirroring Disabled
Source Port 1
Target Port 1
<CTRL>
Port Mirroring Disabled
Source Port 1
Target Port 1
<CTRL>
Z-Help S-Shell
Port Mirroring
Enable or disable port mirroring with this command.
Note:
Port mirroring will be disabled upon the next reset of the switch.
Source Port
Select the source port with this command.
Target Port
Select the target port with this command.
RuggedCom