3com 9000 Manual Do Utilizador

Página de 52
Managing Virtual LANs
41
Switch 3900, and SuperStack II Switch 9300 devices differ from other 
3Com devices. See the Device View online Help to resolve these 
differences.
For the CoreBuilder 9000 Switch, 3Com strongly recommends that 
you read the CoreBuilder 9000 Implementation Guide for information 
on VLANs and other features.
The kinds of VLAN you can implement are determined by VLAN support 
in the devices you manage. For modular hubs, the type of VLAN you can 
implement depends on the installed switching module. For more 
information, refer to the information provided with the device.
VLANs on the
CoreBuilder 9000
Your system offers a collection of interface modules that pass traffic to 
one another using a central switch called the Gigabit Ethernet (GEN) 
Switch Fabric Module. This switch fabric module, a 24-port Layer 2 
switching module, controls the Ethernet traffic associated with its 
interface modules.The switch fabric module supports the following 
modules: 
Layer 2 switching modules — Perform Layer 2 functions. They 
handle bridging and support port-based VLANs only. Available 
Ethernet Layer 2 modules include the 10-port 100BASE-FX Fast 
Ethernet Layer 2 switching module, the 20-port 10/100BASE-TX Fast 
Ethernet Layer 2 Switching Module, and the 36-port 10/100BASE-TX 
Fast Ethernet Layer 2 Switching Module. These modules have two 
backplane ports; the lower-numbered backplane port is enabled and 
can be configured. 
Layer 3 switching modules — Perform Layer 3 as well as Layer 2 
functions. They handle bridging and routing, and support port-based, 
protocol-based, and network-based VLANs. Available Ethernet Layer 3 
modules include the 10-port 100BASE-FX Fast Ethernet Layer 3 
switching module and the 12-port 10/100BASE-TX Fast Ethernet 
Layer 3 Switching Module. These modules have only one backplane 
port and typically reside in the higher-numbered chassis slots (slots 13 
through 16) that have only one port connection to the switch fabric 
module. 
Gigabit Ethernet (GEN) Interface modules — These 2-port Gigabit 
Ethernet interface modules do not perform switching; they act as a 
traffic pipeline to the switch fabric module. Available GEN interface 
modules include the 2-port 1000BASE-SX and 1000BASE-LX models. 
You do not configure the two Gigabit Ethernet ports of the GEN