Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador

 

 

 

 

 

 

Build # 27

  

94

 

 

You can combine local authentication with another eLux NG feature: user roaming. 
User roaming is transferring an active Windows terminal server session from one eLux NG 
terminal to another. This is useful when you want to move to a terminal with certain hardware 
– for example, with a special printer – without logging off from your current ICA or RDP 
session. In user roaming, the terminal disconnects the session when you remove the smart 
card (the processes continue to run on the server) and reconnects when you insert the smart 
card in a second terminal, using the second device’s hardware settings (printer, drive 
mapping). 
All terminals that will be used for user roaming must have user roaming enabled in advance. 
User roaming works with the following smart cards:  
•  CardOS

®

 version “M2” or “M4” 

Siemens GmbH 

•  SICRYPT

®

 CryptoCard 

Fujitsu Siemens Computers 

 
They must be encoded with the users’ Citrix logon data (name, password, domain)  using the 
SICRYPT SMARTY 2 software. A certificate is not permitted.  
User roaming requires a Fujitsu Siemens Computers card reader. 
 

1.  Set the smart card hardware settings as described in “3.15.1 Configuring Smart Card 

Hardware Settings.” 

2.  Set the smart card security settings. In the Setup tab, click the Security subtab. From 

the Smart card drop-down list, click to select the following: 

•  Always required A smart card is required when the Thin Client boots and during 

the entire eLux NG session. If the user removes the card, the session will be 
locked. A smart card and valid PIN are required to unlock the terminal. 

3. Click 

 and OK to close the Setup dialog box.  

4.  Configure one of the following sessions: 

•  ICA See ”4.2.1 Remote Desktop.”  
•  RDP See “4.4.1 Remote Desktop.” 

In the application definition, click to select Roaming. 
Logon information is read directly from the card. The entries User, Password, Domain in 
the application definition dialog will be ignored. 
Note: The option Allow smart card logon (see “3.15.4 Citrix Logon”) cannot be 
combined with user roaming. 

5.  Save your changes. 

 
Activating the Roaming check box starts the terminal server session automatically. Log on to 
a Windows session or unlocking a locked Windows session is reduced to inserting a smart 
card and entering the user PIN for this card. The user logon data is dynamically read from the 
smart card and used to connect to the terminal server. If the local user removes the smart 
card, the terminal server session is disconnected. Therefore, certain settings must be defined 
on the terminal server. For further information, consult the terminal server manual.