Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador
Códigos do produto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
183
To enter a manual eLux NG license key
1. Start the terminal. If your system is unlicensed, you receive the eLux NG system information
message box.
2. The
license key
you received from your eLux NG distributor is specific to this eLux NG
terminal’s host ID (to get your license, provide your supplier with the 12-digit terminal host ID
displayed here). A manual license key has the format: xxx-xxx-xxx-xxx-x.
Enter the complete 13-digit license key. Hyphens are not required.
displayed here). A manual license key has the format: xxx-xxx-xxx-xxx-x.
Enter the complete 13-digit license key. Hyphens are not required.
3. Click
OK
. The terminal is licensed. Licensing is one-time only – eLux NG remains licensed
even if you update firmware or perform a recovery.
5.2 Safe
Boot
Default screen settings are set to values all monitors support. If after configuring the Thin Client you
have massive screen distortion, resolution, frequency and color depth are most likely set to values
your monitor does not support. In this case, switch off your monitor to avoid damage. Start the Thin
Client in Safe Boot mode. Safe Boot allows you start the terminal in a mode which does not damage
hardware. You can then correct screen settings. In addition, network capabilities are disabled. This
allows you to change incorrect network hardware settings.
In Safe Boot, the eLux starter is displayed in English. If you had set a different application language,
do not be concerned. User settings (Setup tab) and defined applications (Configuration tab) are not
deleted. When you exit Safe Boot, your old language will be restored.
have massive screen distortion, resolution, frequency and color depth are most likely set to values
your monitor does not support. In this case, switch off your monitor to avoid damage. Start the Thin
Client in Safe Boot mode. Safe Boot allows you start the terminal in a mode which does not damage
hardware. You can then correct screen settings. In addition, network capabilities are disabled. This
allows you to change incorrect network hardware settings.
In Safe Boot, the eLux starter is displayed in English. If you had set a different application language,
do not be concerned. User settings (Setup tab) and defined applications (Configuration tab) are not
deleted. When you exit Safe Boot, your old language will be restored.
Procedure for Safe Boot
1. Switch off the Thin Client immediately.
2. Restart the Thin Client.
3. During the boot procedure, the supplier logo appears. Press the TAB key when the screen
2. Restart the Thin Client.
3. During the boot procedure, the supplier logo appears. Press the TAB key when the screen
goes blank.
4. The eLux NG logo will be displayed, and then the prompt “Please enter admin password”.
Enter the terminal password (“elux” by default).
• If an invalid password is entered three times, the terminal restarts.
5. At the prompt “factory reset (y/n)?” type n. You can now access eLux NG and make
changes to settings in a mode that is safe for the monitor. Previous settings information is
not lost.
not lost.
6. Restart the Thin Client to exit Safe Boot mode.