Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador

 

 

 

 

 

 

Build # 27

  

188

 

 

 
 
During an eLux NG Recovery Installation, the Thin Client boots from a server over the network, loads 
network information from a so-called boot server”, loads a boot file from a TFTP server, and overwrites 
the entire flash image with a default image retrieved from the recovery server. The software is 
overwritten with the recovery software and settings are returned to factory-delivered default settings.  
A recovery can be used to solve the following problems: 
•  eLux NG cannot be booted anymore. 
•  The flash memory of the Thin Client does not yet contain a basic image. 
•  The password for LocalLogin has been changed from factory settings and is no longer known.  
•  You want to replace the current software on the flash memory with eLux NG. 
•  You want to make a factory reset. 
•  To update from eLux 1.x to eLux NG. 
•  When during update a message box appears saying a recovery is necessary. 
Note

: The Recovery procedures, which install the eLux NG Software to the flash of the Thin Client or 

make a factory reset of the Thin Client, are described in detail in our papers Recovery Installation 
and Migration and Servertransfer. These guides are provided on f 

Manuals / Documentation.  
 

/