Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador
Códigos do produto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
41
3.6 Firmware
To update terminal firmware, you need a new image definition file (IDF) (the name of the file may be
the same). The new IDF is created using the software “ELIAS NG.” For information on how to create
an IDF, see the ELIAS NG Administrator’s Guide or the Scout Enterprise Administrator’s Guide.
This new IDF may reside on an FTP/HTTP server, CD-ROM or USB stick. The image file must reside
in the same directory as the software packages (that is, in the container)!
the same). The new IDF is created using the software “ELIAS NG.” For information on how to create
an IDF, see the ELIAS NG Administrator’s Guide or the Scout Enterprise Administrator’s Guide.
This new IDF may reside on an FTP/HTTP server, CD-ROM or USB stick. The image file must reside
in the same directory as the software packages (that is, in the container)!
Figure 25: Setup > Firmware
3.6.1 Updating over the Network (Base OS)
Packages and the base OS can be updated over the network.
To update over the network, do the following:
To update over the network, do the following:
1. From
the
Setup
tab, click the Firmware subtab.
2. Enter the IP address or name of the update server in the Server field.
3. Enter the name of the new IDF file in the IDF-File field and the directory where it is
3. Enter the name of the new IDF file in the IDF-File field and the directory where it is
located in the Path field.
4. In
the
Protocol
area select:
• HTTP if the update server is an HTTP server. Enter the proxy IP address or name,
and the proxy port number, if used (optional). To use Microsoft Internet Information
server 6.0, you must define several new MIME types. See the section ““3.6.4
Microsoft Internet Information Server.”
server 6.0, you must define several new MIME types. See the section ““3.6.4
Microsoft Internet Information Server.”
• FTP if the update server is an FTP server.
• Enter the username and password for the server in the User and Password fields.
• If no username or password is defined for the server, the entries are arbitrary. Use
• Enter the username and password for the server in the User and Password fields.
• If no username or password is defined for the server, the entries are arbitrary. Use
elux
as the password and username. Do not leave blank.
• We recommend you access the FTP server using a user account. However,
“anonymous” FTP is supported.
5.
Click Apply.