3com 5500-SI Manual Do Utilizador

C

HAPTER

 19: ACL C

ONFIGURATION

■

Port-based mode: The Switch delivers the traffic actions in the QoS profile directly 
to the user port. 

Perform the following configuration in Ethernet Port View. 

Table 395   Configuring Profile Application Mode

 

By default, port-based mode is enabled on the port. 

With this configuration, you can apply all traffic actions in the QoS profile to the 
current port. 

In System View, you can apply the QoS profile to one or more consecutive ports. 

Table 396   Applying QoS Profile to the Port in System View

 

In Ethernet Port View, you can only apply the QoS profile to the current port. 

Table 397   Applying QoS Profile to the Port in Ethernet Port View

 

You cannot delete the specific QoS profile once you apply it to the port.

Displaying and Debugging QoS Profile Configuration

Use the 

 command in any view to check the configuration result of the QoS 

profile. 

Table 398   Displaying QoS Profile Configuration

The Switch implements the QoS profile function for the accessed user. 

Configure the user-based mode on the port qos-profile user-based

Restore the default (port-based) mode on 
the port 

 profile_name

Apply the QoS profile 
to the port

 interface { 

interface_name | interface_type interface_num

 } [ to 

 | interface_type 

 } ]

Remove the 
configuration 

 profile_name interface { 

interface_name |

 interface_type interface_num } [ to 

interface_name |

 interface_type 

interface_num } ]

Apply the QoS profile to the port

Remove the configuration 

 profile_name

Display QoS profile 
configuration

 profile_name | 

interface_name |

 interface_type 

interface_num } | user user_name }