3com 5500-SI Manual Do Utilizador
RSPAN Features 383
Configuration
Procedures in the Source
Switch
Configuration
Procedures in the
Intermediate Switch
Table 404 Configuration procedures in the source switch
Operation
Command
Description
Enter system view
system-view
—
Establish Remote-probe
VLAN, and enter VLAN view
VLAN, and enter VLAN view
vlan vlan-id
The parameter vlan-id represents
the ID of the Remote-probe VLAN.
the ID of the Remote-probe VLAN.
Define the current VLAN as
Remote-probe VLAN
Remote-probe VLAN
remote-probe vlan enable
Required.
Exit the current view
quit
—
Enter the Ethernet port view
of Trunk ports
of Trunk ports
interface interface-type
interface-number
interface-number
—
Configure Trunk ports so that
packets of the Remote-probe
VLAN can pass through
packets of the Remote-probe
VLAN can pass through
port trunk permit vlan
remote-probe-vlan-id
remote-probe-vlan-id
Required.
Exit the current view
quit
—
Configure the source group
of remote mirroring
of remote mirroring
mirroring-group group-id
remote-source
remote-source
Required.
Configure the source ports of
remote mirroring
remote mirroring
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
mirroring-port
mirroring-port-list { both |
inbound | outbound }
Required.
Configure the reflector ports
of remote mirroring
of remote mirroring
mirroring-group group-id
reflector-port reflector-port
reflector-port reflector-port
Required.
The reflector ports of remote
mirroring cannot enable STP, and
have to be Access ports.
The reflector ports of remote
mirroring cannot enable STP, and
have to be Access ports.
The reflector ports cannot have
the vlan-vpn commands
configured.
the vlan-vpn commands
configured.
Configure the remote-probe
VLAN for the source group of
remote mirroring
VLAN for the source group of
remote mirroring
mirroring-group group-id
remote-probe vlan
remote-probe-vlan-id
remote-probe vlan
remote-probe-vlan-id
Required.
Display the configuration for
the source group of remote
mirroring
the source group of remote
mirroring
display mirroring-group
remote-source
remote-source
Optional.
The display command can be
used under any view.
The display command can be
used under any view.
Table 405 Configuration procedures in the intermediate switch
Operation
Command
Description
Enter system view
system-view
—
Establish remote-probe VLAN,
and enter VLAN view
and enter VLAN view
vlan vlan-id
The parameter vlan-id
represents the ID of the
remote-probe VLAN.
represents the ID of the
remote-probe VLAN.
Exit the current view
quit
—
Enter the Ethernet port view of
Trunk ports
Trunk ports
interface interface-type
interface-number
interface-number
—
Configure Trunk ports so that
packets in the remote-probe
VLAN can pass through
packets in the remote-probe
VLAN can pass through
port trunk permit vlan
remote-probe-vlan-id
remote-probe-vlan-id
Required.
This configuration is necessary
for ports of intermediate
switch that are connected with
the source switch or the
destination switch.
This configuration is necessary
for ports of intermediate
switch that are connected with
the source switch or the
destination switch.