3com 3CRWX440095A Manual Do Utilizador

C

HAPTER

 7: M

ANAGING

 

AND

 M

ONITORING

 Y

OUR

 N

ETWORK

To verify your deployment:

1 Select a WX switch from the Organizer panel.

2 Select the Status Summary tab. Up status (green) confirms a successful deploy.

This section contains information about basic administrative tasks you can 
perform in 3WXM.

For detailed information about performing administrative tasks including 
configuring WX switch management services, see the chapter 
“Configuring WX System and Administrative Parameters” in the Wireless 
LAN Switch Manager Reference Manual.

For more information about image and file management, see the chapter 
“Managing WX System Images and Configurations” in the Wireless LAN 
Switch and Controller Command Reference.

You can configure the following information and management services 
for the WX switch:

„

System information—You can specify system contact information, as 
well as the CLI prompt and the banner message that appears at each 
session.

„

HTTPS—By default, HTTPS is enabled. TCP port 443 is used for secure 
access by Web Manager, the 3Com Web-based application for 
managing a WX switch. 

„

Telnet—By default, Telnet is disabled. You can enable Telnet for 
unencrypted access to the CLI. By default, a Telnet user is only 
provided with read-access to the switch. You must set the service-type 
attribute to 6 for users who are to be given read and write access to 
the switch through Telnet.

„

SSH—By default, SSH is enabled. You can use SSH for encrypted 
access to the CLI. 

„

SNMP—By default, SNMP is disabled. You can configure SNMP 
community strings and User Security Model (USM) users, notification 
profiles, and notification targets.