3com WX1200 Manual Do Utilizador
set system ip-address
59
set system
ip-address
ip-address
Sets the system IP address so that it can be used by various services in the
WX switch.
WX switch.
CAUTION: Any currently configured Mobility Domain operations cease if
you change the IP address. If you change the address, you must reset the
Mobility Domain.
you change the IP address. If you change the address, you must reset the
Mobility Domain.
Syntax —
set system ip-address ip-addr
ip-addr
— IP address, in dotted decimal notation.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command sets the IP address of the WX
switch to 192.168.253.1:
switch to 192.168.253.1:
WX4400# set system ip-address 192.168.253.1
success: change accepted.
success: change accepted.
See Also
set system location
Stores location information for the WX switch.
Syntax —
set system location
string
string
— Alphanumeric string up to 256 characters long, with no
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You cannot include spaces in the system location string.