3com 4500 PWR 50-PORT Manual Do Utilizador
SNMP Configuration Commands
385
3Com recommends that you do not use the
notify-view
parameter when
configuring an SNMP group, for the following reasons:
■
The
snmp-agent target-host
command automatically generates a
notify-view
for a user, and adds it to the corresponding group.
■
Any change of the SNMP group
notify-view
will affect all the users related to
this group.
Example
To create an SNMP group named 3Com, enter the following:
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]snmp-agent group v3 3Com
[SW4500]
snmp-agent
local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameter
local-engineid:
Specify an engineID for the local SNMPv3 entity
engineid:
Specify the engine ID with a character string, only composed of
hexadecimal numbers between 5 and 32 inclusive. The default value is "Enterprise
Number + device information".
Number + device information".
Description
Use the
snmp-agent local-engineid
command to configure a name for a local
or remote SNMP engine on the Switch. Use the
undo snmp-agent
local-engineid
command to restore the default setting of engine ID.
Device information is determined according to different products. It can be IP
address, MAC address or user defined text. However, you must use numbers in
hexadecimal form.
address, MAC address or user defined text. However, you must use numbers in
hexadecimal form.
Example
Configure the ID of a local or remote device as 1234512345.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
<SW4500>snmp-agent local-engineid 1234512345
<SW4500>
snmp-agent mib-view
Syntax
snmp-agent mib-view { included | excluded } view-name oid-tree
undo snmp-agent mib-view view-name