3com 3CR17662-91 Manual Do Utilizador

Página de 104
Configuration Conversion Utility
51
CAUTION: To protect your Switch from unauthorized access, you must 
change all three default passwords as soon as possible, even if you do not 
intend to actively manage your Switch.
Table 10   Default Users
Use the admin default user name (no password) to login and carry out 
initial Switch setup.
To set a password for the admin user in the CLI, enter the following from 
system view:
[S4200G]local-user admin <cr>
[S4200G-luser-admin]password simple xxxxxxxx
(where xxxxxxxx is your chosen password).
Save the configuration in the User View.
For information on the lost password procedure please refer to the 
Configuration Guide that is supplied with your Switch.
Configuration 
Conversion Utility
The 3Com Switch 4200G Configuration Conversion Utility (CCU) enables 
you to convert the key configuration parameters from a range of 3Com 
SuperStack II and SuperStack 3 devices to the configuration file format 
used by your Switch 4200G unit. The utility provides conversion for a 
number of Switch features 
User 
Name
Default
Password Access Level
monitor
monitor
monitor 
The user can view all manageable parameters, except 
special/security features, but cannot change any manageable 
parameters
manager manager
manager
The user can access and change the operational parameters 
but not special/security features
admin
(no 
password)
security
The user can access and change all manageable parameters
10014914AA.book  Page 51  Friday, July 7, 2006  2:08 PM