Extron electronic MLC 104 Series Folheto

Página de 2
Specifications — MLC 104 Series
Control/remote — MLC controller host ports 
Serial control port ........................  2 RS-232: 1 side panel 3.5 mm, 3-pole, direct insertion captive screw connector, 
1 front panel 2.5 mm mini stereo jack 
Baud rate and protocol ...............  38400, 8 data bits, 1 stop bit, no parity 
Serial control pin configurations  3-pole direct insertion captive screw connector: TX = TX, RX = RX, GND = GND 
Mini stereo jack: tip = TX, ring = RX, sleeve = GND 
Ethernet control port (MLC 104 IP) 
1 RJ-45 female 
Ethernet data rate (MLC 104 IP)  10/100Base-T, half/full duplex with autodetect 
Ethernet protocol (MLC 104 IP)  ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP 
Ethernet default settings (MLC 104 IP) 
Link speed and duplex level = autodetected 
IP address = 192.168.254.254, subnet mask = 255.255.0.0, default gateway = 0.0.0.0 
DHCP = off 
Web server (MLC 104 IP) ...........  Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory
Secondary control panel (SCP) ..  (1) 3.5 mm 5-pole direct insertion captive screw connector
Program control ...........................  Extron’s configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
Microsoft
®
 Internet Explorer, Telnet (MLC 104 IP) 
Control — projector/plasma 
Projector control port ..................  (1) 3.5 mm direct insertion captive screw connector, 3 pole 
Programmable for RS-232 control (±5 V) or TTL level (0 to 5 V) infrared control up 
to 1 MHz 
Baud rate and protocol (RS-232)  115200 to 300 (9600 default) baud (configurable); 8 (default) or 7 data bits;
1 (default) or 2 stop bits; no parity (default), or even or odd parity
Control — switcher 
Switcher control port ..................  (1) 3.5 mm direct insertion captive screw connector, 3 pole, 
for RS-232 control (±5 V) 
Baud rate and protocol ...............  9600 baud; 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or 
even or odd parity 
Digital input control 
Number/type ...............................  1 digital
Connector ......................................  (1) 3.5 mm direct insertion captive screw connector (shared with power sense port)
Pin configuration .........................  power sense = digital in, GND = GND
Input voltage range .....................  0-12 VDC
Input impedance ..........................  28k ohms
Programmable pullup .................  2k ohms to +3.3 VDC
Threshold low to high .................  >1.2 VDC
Threshold high to low .................  <1.1 VDC
General 
External power supply ...............  100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, 
regulated 
Power input requirements .........  12 VDC, 0.285 A 
Temperature/humidity ..............  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing 
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing 
Rack mount ...................................  Yes, with optional rack mounting kits, and also wall- and furniture-mountable 
with optional mounting kits 
1-2 
MLC 104 Series MediaLink
 Controllers • Specifications