Kenwood KAC-8404 Manual Do Utilizador
4
English
■ RCA cable or Speaker level input connection
40
40
Connection
CENTER UNIT
(CD receiver, etc.)
(CD receiver, etc.)
RCA cable*
• Bridged Connections
Battery
Ground wire*
Battery wire*
Protective Fuse*
Power control wire
2WARNING
To prevent fire caused by a short in the wiring,
connect a fusible link or breaker nearby the
battery’s positive terminal.
connect a fusible link or breaker nearby the
battery’s positive terminal.
2CAUTION
• If sound is not output normally, immediately turn
power off and check connections.
• Be sure to turn the power off before changing the
setting of any switch.
• If the fuse blows, check wires for shorts, then
replace the fuse with one of the same rating.
• Check that no unconnected wires or connectors
are touching the car body. Do not remove
caps from unconnected wires or connectors to
prevent short circuits.
caps from unconnected wires or connectors to
prevent short circuits.
• Connect the speaker wires to appropriate speaker
connectors separately. Sharing the negative wire
of the speaker or grounding speaker wires to the
metal body of the car can cause this unit to fail.
of the speaker or grounding speaker wires to the
metal body of the car can cause this unit to fail.
NOTE
• Do not connect cables and leads to both RCA
cable input jacks and the speaker level input
terminals simultaneously, for this may cause
malfunction or damage.
terminals simultaneously, for this may cause
malfunction or damage.
Speaker level input connections
• The genuine-accessory car stereo shall have a
maximum power output of no more than 40 W.
• The power is turned on and off as the unit
detects input signal (Signal Sensing Turn-ON).
There fore it is not necessary to connect the
power control wire.
There fore it is not necessary to connect the
power control wire.
Speaker output terminals
• Stereo Connections:
The speakers to be connected should have an
The speakers to be connected should have an
impedance of 2Ω or greater.
• Bridged Connections:
Make connections to the LEFT channel
Make connections to the LEFT channel
9
and the RIGHT channel
· SPEAKER OUTPUT
terminals.
The speakers to be connected should have an
impedance of 4Ω or greater.
The speakers to be connected should have an
impedance of 4Ω or greater.
Fuse
40 A × 1
A channel
Left speaker
Left speaker
A channel
Right speaker
Right speaker
B channel
Right speaker
Right speaker
B channel
Left speaker
Left speaker
A channel
Speaker (Bridged)
Speaker (Bridged)
B channel
Speaker (Bridged)
Speaker (Bridged)
A channel input
B channel input
Terminal cover
■ Power wire and Speaker wire connection
• RCA cable connections
• Speaker level input connections
Power control wire*
(RCA cable connection)
(RCA cable connection)
40
Genuine-accessory car
stereo (No line output
center unit etc.)
stereo (No line output
center unit etc.)
Cable Color of the connector
A channel
Left
Left
9 White
· White/Black
A channel
Right
Right
9 Gray
· Gray/Black
B channel
Left
Left
9 Green
· Green/Black
B channel
Right
Right
9 Purple
· Purple/Black
* Commercially available parts
• Stereo Connections
Lead terminal*
B64-3935-00_00_KE.indb 4
B64-3935-00_00_KE.indb 4
07.10.23 3:44:59 PM
07.10.23 3:44:59 PM