Samsung DCS 400si Manual Do Utilizador

To forward your phone when you activate DND.

•

Dial 607 plus the extension number or group number.

•

Receive confirmation tone and hang up.

NOTE:
1. If the Hot Keypad feature has been turned off you must first lift the hand-

set or press the SPEAKER key before you begin dialing.

A display keyset may review or change call forward options and destina-
tions. Call forward access can be done via the keypad or by accessing the
keyset display features. To review or change call forward options:

•

Press TRANSFER 102.

•

Dial 0-6 to select the forward type (e.g., 1) OR
Press UP or DOWN to select the forward type
Press the right soft key to move the cursor

•

Dial the destination number (e.g., 202) OR
Press UP or DOWN to select the destination
Press the right soft key to move the cursor

•

Dial 1 to set OR
Press UP or DOWN to select YES or NO

•

Press TRANSFER to store and exit

To pick up (answer) a call ringing at another station, lift the handset and dial
65 plus the extension number of the ringing phone.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before you begin dialing.

To pick up (answer) a call ringing in any pickup group, lift the handset and
dial 66 plus the desired group number 01–20 or press the flashing GROUP
PICKUP key if available.

NOTES:
1. A group pickup key can have an extender for a specific pickup group.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-

set or press the SPEAKER key before dialing the access code.

3. In system software version 1.06 or higher, pick up features may be used

to answer recalls to a station.

23

If you have both a Forward on Busy destination and a Forward No Answer
destination programmed, you may set both of these at the same time:

•

Dial 604.

•

Receive confirmation tone and hang up.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the

handset or press the SPEAKER key before you begin dialing.

When you want all calls to your extension forwarded to the extension where
you are now:

•

Dial 605 plus your extension number.

•

Receive confirmation tone and hang up.

If you want a specific extension’s calls forwarded to your phone (Remote Call
Forward):

•

Dial 605 plus the desired extension number.

•

Receive confirmation tone and hang up.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before you begin dialing.

To forward outside calls to a number outside of your business, you must
have a FWD EXTERNAL button on your keyset.

•

While on-hook, press TRANSFER and then dial 102.

•

Dial 6.

•

Dial the outside line access code followed by the telephone number that
you want.

•

Press TRANSFER to store.

•

Press FWD EXTERNAL to turn the feature on and press it again to turn
the feature off.

NOTES:
1. External Call Forward will cancel all other call forwarding instructions.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-

set or press the SPEAKER key before you begin dialing.

3. If your system software version is 1.06 or higher, intercom calls to your

station may be forwarded to an external number outside your business
(your installation company must enable this feature).

22