Sony 9000 Manual Do Utilizador
235
Executing a Transition
Ch
apt
apt
er 3
T
ra
n
s
iti
ons
Executing a Transition
There are two ways of executing a transition: as an auto transition by a button
operation, and as a manual transition using the fader lever. You can also use a
combination of these two modes.
operation, and as a manual transition using the fader lever. You can also use a
combination of these two modes.
For an overview of the auto transitions and manual transitions, see “Executing
a Transition” (page 42).
a Transition” (page 42).
Transition Indicator Function
In each of the M/E banks and PGM/PST bank, to the left of the fader lever is a
transition indicator composed of 30 LEDs. This indicator shows the state of the
transition, whether auto or manual, by which LEDs are lit.
transition indicator composed of 30 LEDs. This indicator shows the state of the
transition, whether auto or manual, by which LEDs are lit.
Transition indicator
For example, in the illustration above, it can be seen that the transition is more
than half completed.
When the transition is completed, all of the LEDs go off.
than half completed.
When the transition is completed, all of the LEDs go off.
Lit