GarrettCom 6K32 Manual Do Utilizador

Magnum 6K32 Managed Switch            Installation and User Guide (02/05) 

 

43 

.

.

 

FDX / HDX and 10/100 operation, and the same face-plate lettering.  

While the functionality of these two modules is essentially the same, the 6KP6-

RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type. 

The Magnum 6KP6-RJSSC 

is also a Combo module 

equipped with 4 dual speed 

copper ports and 2 Single-

mode SC-type connectors. It 

provides an advantage 

through combining copper 

and Fiber functions in one module of the 6K32 Switch supporting four Copper and two 

single-mode fiber network segments.  

The 6KP6-RJSSC, when installed in a Magnum 6K32 Switch operates on 

copper at the 100m distance.  The Fiber is single-mode and cable lengths can be as much 

as 25+ Km (see Power Budget, Section 4.5) 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and a 

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 

10/100 LED indicates 100Mbps speed when lit and 10Mbps  speed when off. To 

distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label 

“Sgl. M.” is at the top of the faceplate of the 6K6-RJSSC.   

The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper 

ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of  

copper and Fiber functions in one module to the 6K32 Switches, supporting four Copper 

and two single-mode (Long-Reach) fiber network segments.  

The 6KP6-RJSSC, when installed in a Magnum 6K32 Switch has copper 

 

4