GarrettCom 6K32 Manual Do Utilizador

Magnum 6K32 Managed Switch            Installation and User Guide (02/05) 

 

49 

.

.

 

The Magnum 6KP8-45SLC eight port Module is a combo module with copper 

and fiber (Small Form Factor) LC type fiber ports.  

The small size of  LC connectors 

give an advantage of placing more 

ports on one module. The 6KP8-45-

2SLC is equipped with 6 10/100 

RJ-45 ports and 2 Single-mode fiber 

ports. 

When installed in a Magnum 6K32 

Switch, it supports the standard 

distances as mentioned on 5.2.4. 

and the LEDs also act similarly. 

The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector 

equipped with SC type connectors and can be easily snapped in and out. The Gigabit 

fiber ports are most popular as server-to-switch and switch-to-switch applications. It 

supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 

550m at full duplex.  

 

 

 

                                                                                                                                                             

The GBIC transceiver has been offered in the modular slot with multiple options as per 
the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-
45), whereas the single Gigabit module comes in flavor of  G+2 (100Mb fiber ports) or 
G+4(10/100 RJ-45 ports) as shown in the above figure. 

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver 

(take care to insert it the right way up, arrows on top) until it clicks in space. While 
removing the transceiver, press the clips on either side of the transceiver at the same time 
and pull the transceiver out. 

Each port has an Activity (ACT) LED indicating packets being received and a 

Link (LK) LED indicating proper connectivity with the remote device when lit. 

 

ACT

F/

ACT

F/