GarrettCom Magnum 6KQ Manual Do Utilizador

Magnum 6KQ Managed Field Switch Installation and User Guide             (04/07) 

 
 

9

.

.

ACT

F/H

ACT

F/H
ACT

F/H

Alarm Relay contacts provided on each Magnum 6KQ Switch monitor the hardware and 

software through traps, providing a record of any losses of power signals and other user- 

defined software events. See Section 3.5 for details. 

The wide selections of Quad port (queen size) modules are key to the flexibility and 

adaptability of Magnum 6KQs. Some of the popular 4 ports modules are described 

below. For a list of all the modules and options, see Section 1.2   

 

NOTE: The 6KQ modules can only be configured at the factory. 

 

In a four-port SFF (Small Form Factor) 

fiber port module, all of the fiber ports 

are of the same speed (100Mb), mode, 

and connector type. Small Form Factor (SFF) Fiber Ports come in multi-mode forms 

MT-RJ or LC-type connectors, and single-mode form LC-type connectors.  

The 100Mb fiber four-port modules for the Magnum 6KQ’s normally are set 

(factory default) to operate in full-duplex mode for best fiber distance and performance. 

Using the 6K-MNS software, the user may select full- or half-duplex mode per-port 

through set port command.  

The set-up of the software 

(See Magnum 6K-MNS 

Software Manual) gives the 

user flexibility to adapt to any 

FDX or HDX type of Fast Ethernet devices).  

There are three LED’s per fiber port. The Link (LK) LED indicates “ready for 

operation” on that port when lit.  The F/H LED indicates operation in full-duplex mode 

when ON (half-duplex when OFF).  The blinking ACT LED indicates receiving Activity 

AC

F/

AC

F/