GarrettCom DS50 Manual Do Utilizador

Magnum DS50 / DS60s Dual Speed Hubs                  Installation and User Guide (06/02)

 

Port 1-5: Repeater Ports, with bridge between 

 

       Data Rate: 10/100 Mbps (Dual-Speed) 

 

       PDV (Path Delay Value):  80BT 

 

Port 6: Switched Port (DS60C only) 

 

        10/100Mbps (Dual-Speed) 

 

       When set to “FF”: 

 

 

Data Rate: 100 Mbps Full Duplex 

 

 

PDV (Path Delay Value):  50BT (end node) 

 

       When set to “A” 

Date Rate: 10Mbps or 100Mbps (Depends upon the connected 
speed on the other side; if the connected unit supports auto-
negotiate then run on full-duplex otherwise half-duplex) 

Processing type: Store and Forward 

Filtering and Forwarding Rate: Switch = “10”, 14,880 pps max. 

Switch = “100”, 148,800 pps max 

 

Auto-learning:  8K addresses  

 

Packet buffers: 1MB dynamically allocated 

 

Latency (not including packet time): 5

µs  

 

Packet Processing on Repeater Port, ports #1-5 bridged 

 

 

Processing type: advertising and sharing 

 

Auto-learning:  2K addresses  

 

Packet buffers: 256 dynamically allocated and shared on ports #1-5 

 

Latency (not including packet time): 5

µs    

 

Maximum Ethernet Segment Lengths 

 

 

10BASE-T (unshielded twisted pair, 10Mb)  - 100 m (328 ft) 

 

 

 

100BASE-TX (Cat. 5 twisted pair, 100Mb)   - 100 m (328 ft)

 

100BASE-FX, half-duplex: (multi-mode) 

 - 412 m (1350 ft) 

 

 

 

100BASE-FX, full-duplex: (multi-mode) 

 - 2.0 km (6,562 ft) 

 

 

100BASE-FX, half-duplex: (single-mode)   - 412 m (1350 ft) 

100BASE-FX, full-duplex: (single-mode) 

 - 20.0 km (65,620 ft) 

 

        100BASE-FX, full-duplex: (single-mode, long)- 40.0 km (131,240 ft)

 

 

Network Standards 

 

Ethernet IEEE 802.3u: 100BASE-TX 

 

IEEE 802.3: 10BASE-T  

 

Operating Environment 

 

Ambient Temperature: 32ºF to 122ºF (0ºC to 55ºC) 

 

Storage Temperature: -5ºF to 160ºF (-20ºC to 70ºC) 

 

Ambient Relative Humidity: 5 % to 95 % (non-condensing) 

2 

.

.