Fortinet 548B Manual Do Utilizador

 

 

- 260 - 

This command to set the NAS-IP address for the radius server. 

 

radius-server attribute 4 [ipaddr] 
no radius-server attribute 4 

 

no – use this command to reset the NAS-IP address for the radius server. 

 

None 

Global Config   

 

 

This command cnfiguresradius server dead time. 

 

radius-server dead-time <value> 
no radius-server dead-time 

 

Value - Set radius server dead time (sec). Range 1 – 255. 

no - This command is used to set dead time to the default value. 

 

255 

Global Config   

 

 

This command is used to configure the RADIUS authentication and accounting server. 

If the 'auth' token is used, the command configures the IP address to use to connect to a RADIUS 
authentication server. Up to 3 servers can be configured per RADIUS client. If the maximum number of 
configured servers is reached, the command will fail until one of the servers is removed by executing the 
no form of the command. If the optional <port> parameter is used, the command will configure the UDP 
port number to use to connect to the configured RADIUS server. In order to configure the UDP port