Fortinet 30B Manual Do Utilizador

Set the following and select OK.

Firewall policy configuration is the same in NAT/Route mode and Transparent 
mode.

Note that these policies allow all traffic through. No protection profiles have been 
applied. Ensure you create additional firewall policies to accommodate your 
network requirements.

For details, see the FortiGate Administration Guide.

After connecting to the CLI, you can use the following procedures to complete the 
basic configuration of the FortiGate unit. Ensure you read the section 

 before beginning.

When shipped, the FortiGate unit has a default address of 192.168.1.99 and a 
netmask of 255.255.255.0. for either the Port 1 or Internal interface. You need to 
configure this and other ports for use on your network.

config system interface

edit <interface_name>

set mode static
set ip <address_ip> <netmask>

end

config system interface

edit external

set mode dhcp
set distance <integer>
set defaultgw {enable | disable}
set dns-server-override {enable | disable}

end

Select the port connected to the Internet.

All

Destination Interface Select the port connected to the network.
Destination Address All
Schedule

always

Any

Accept