GarrettCom MNS-6K 4.1.4 Manual Do Utilizador

237 

 

 
  ============================================ 
    VLAN ID  

|   FORBIDDEN PORTS 

  =========

====================

===

============ 

         1    

|  None 

         2  

|  11, 12, 13, 14, 15 

 

 
A dynamic VLAN must be converted to a static VLAN before it can have an IP address. 

fter converting a dynamic VLAN to a static VLAN use the “save”  command to save the 

ithin the same broadcast domain, a dynamic VLAN can pass through a device that is not 

VRP assigns dynamic VLANs as tagged VLANs. To configure the VLAN as untagged, first 

 

ebooting a switch with a dynamic VLAN deletes that VLAN. However, the dynamic VLAN re-

y receiving advertisements from other devices running GVRP, the switch learns of static 

 GVRP-enabled switch does not advertise any GVRP-learned VLANs out of the port(s) on 

 

 

 
A
changes made – on a reboot the changes can be lost without the save command. 
 
W
GVRP-aware. This is because a hub or a switch that is not GVRP-aware will flood the GVRP 
(multicast) advertisement packets out all ports. 
 
G
convert the tagged VLAN to a static VLAN. 
 
R
appears after the reboot if GVRP is enabled and the switch again receives advertisements for that 
VLAN through a port configured to add dynamic VLANs. 
 
B
VLANs from those devices and dynamically (automatically) creates tagged VLANs on the links to 
the advertising devices. Similarly, the switch advertises its static VLANs to other GVRP-aware 
devices. 
 
A
which it originally learned of those VLANs.