Avaya 580 Manual Do Utilizador

8-46

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Chapter 8

The GBIC Identification feature identifies the type of GBICs that are 
installed in 80-series gigabit modules with GBIC interfaces. The feature 
identifies the following types of connectors:

■

GBIC SX (short wavelength)

■

GBIC LX (long wavelength)

■

GBIC LX/LH (long wavelength/long haul)

If any nonstandard connectors are present, the feature identifies them as 
GBIC LX/LH. You can view this information by using the Web Agent, CLI, 
or SNMP. 

To use the Web Agent to view the type of GBICs that are connected to the 
modules in your switch, open the Physical Port Configuration Web page. 
The type of GBIC that is connected to each port is displayed in the 
Connector field on this Web page. 

To open the Physical Port Configuration Web page:

1.  In the navigation pane, expand the Modules & Ports folders, and then 

click Configuration. 

The Module Information Web page is displayed in the content pane. 

2.   In the Ports column, click the number for the module that you want to 

view GBIC types for.

The Physical Port Configuration Web page is displayed. See 

 for Gigabit modules and 

 for 10/100 modules.

To view the type of GBICs that are connected to the modules in your 
switch, use the following CLI command:

>

 show port physical [{<mod-num> | <mod-swport-range>} [...,{<mod-

num> | <mod-swport-range>}]]

The type of GBIC that is connected to each port is displayed in the 

Connector

 field.