Avaya 580 Manual Do Utilizador
Document No. 10-300077, Issue 2
13-17
Configuring Access Lists
CLI Command
To enable ACL logging, use the following CLI command:
(configure)#
ip acl-logging enable <access-list-name> <rule-
number>
To disable ACL logging, use the following CLI command:
(configure)#
ip acl-logging disable <access-list-name> <rule-
number>
Sample Event Log
Entries
Entries
displays sample ACL matches in the event log.
Figure 13-5. Sample ACL matches in the event log
Setting a Logging Interval
Web Agent
Procedure
Procedure
To set the interval for ACL logging:
1. In the navigation pane, expand the Routing > IP > Configuration
folders, and then click Access Control.
The IP Access Control Web page is displayed in the content pane. See
2. In the Interval between logging of Access Rule Matches (in seconds)
field, enter the interval at which you want ACL matches logged. Enter
an interval from 1 to 60 seconds.
an interval from 1 to 60 seconds.
The default setting is 2 seconds.
3. Click Apply.