Avaya 580 Manual Do Utilizador
16-10
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 16
2. To create a new IPX Static Route, click CREATE.
* Note: Only the create button is shown if no IPX Static Routes are
configured.
The Add IPX Static Route Web page is displayed. See
.
Figure 16-7. Add IPX Static Route Web Page
3. See
to configure the IPX Static Route parameters.
Table 16-4. IPX Static Route Parameters
Parameter
Allows you to...
Network
Enter the IPX network number that you want to assign to
the IPX static route.
the IPX static route.
Next-Hop Node
Enter the MAC address for the next destination to which
the packet is routed. Format of the value to enter is
aa:bb:cc:dd:ee:ff.
the packet is routed. Format of the value to enter is
aa:bb:cc:dd:ee:ff.
Interface
View the IPX Interface associated with the next hop.
Ticks
Enter the amount of time (in ticks) that the packet takes to
reach the network number you specified. A tick is
approximately 1/18th of a second.
reach the network number you specified. A tick is
approximately 1/18th of a second.
Hops
Enter the number of routers (hops) that the packet must
pass through before reaching the network number
associated with the IPX network.
pass through before reaching the network number
associated with the IPX network.