Avaya C460 Manual Do Utilizador
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
145
The syntax for this command is:
show broadcast storm control
Example:
show cam
User level: read-only, read-write, admin.
Use the show cam command to display the CAM table entries for a specific
module and port.
L MACs associated with LAGs appear under the LAG ID, not under the LAG
Use the show cam command to display the CAM table entries for a specific
module and port.
L MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
By Module and Port
The syntax for this command is:
show cam
[module[/port]]
C460-1> show broadcast storm control
Broadcast Threshold
Storm Control
---------------- ------------
disable 500
mac-addr
MAC address
module
(Optional)
(Optional)
Number of the module (3-6). If you do not specify a number, all
modules are shown.
modules are shown.
port
(Optional)
(Optional)
Number of the port on the module. If you do not specify a
number, all ports on the specified module are shown.
number, all ports on the specified module are shown.