Avaya C460 Manual Do Utilizador
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
153
show erase status
User level: user, privileged, supervisor
Use the show erase status command to view the status of the erase
configuration operation.
Use the show erase status command to view the status of the erase
configuration operation.
The syntax for this command is:
show erase status
show event-log
User level: read-only, read-write, admin.
Displays the encrypted event log file.
Displays the encrypted event log file.
The syntax for this command is:
show event-log
show event-log (Layer 3)
User level: read-only, read-write, admin.
Displays the encrypted event log file.
Displays the encrypted event log file.
The syntax for this command is:
show event log
show fragment
User level: read-only, read-write, admin.
Use the
Use the
show fragment
command to display information regarding fragmented
IP packets that are destined to the router.
L The router does not perform reassambly of packets in transit.
This command displays the following information:
L The router does not perform reassambly of packets in transit.
This command displays the following information:
Size
Maximum number of packets set by the
fragment size
command
Chain
Maximum number of fragments for a single packet set by the
fragment chain
command.
Timeout
Maximum number of seconds set by the fragment timeout
command.
command.
Queue
Number of packets currently awaiting reassembly.
Assemble
Number of packets successfully reassembled
Fail
Number of packets which failed to be reassembled