Avaya C460 Manual Do Utilizador
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
25
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
name in quotation marks, for example “new york”.
configure
User level: read-write, admin.
Use the configure command to enter configure mode.
Use the configure command to enter configure mode.
The syntax for this command is:
configure
Example:
copy l2-config tftp
User level: read-write, admin.
Use the copy l2-config tftp command to upload the Layer 2 parameters from
the current NVRAM running configuration to a file via TFTP.
L To use this command, you need to have an active tftp server and to create a file
Use the copy l2-config tftp command to upload the Layer 2 parameters from
the current NVRAM running configuration to a file via TFTP.
L To use this command, you need to have an active tftp server and to create a file
into which to download the data.
L If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server.
The syntax for this command is:
copy l2-config tftp
<filename> <ip>
Example:
copy running-config startup-config
User level: privileged, supervisor.
Use the copy running-config startup-config command to copy the active
policy configuration to the startup configuration file in the NVRAM.
Use the copy running-config startup-config command to copy the active
policy configuration to the startup configuration file in the NVRAM.
C460-1(super)# configure
C460-1(configure)#
filename
file name (including full path)
ip
IP address of the host
C460-1# copy l2-config tftp c:\C460\config 149.49.152.36