Avaya C460 Manual Do Utilizador

Chapter 2        Avaya C460 CLI Commands

32

Avaya C460 Reference Guide

User level: read-write, admin.
Use the enable interface command to enable the inband and outband 
interfaces.

The syntax for this command is:

{outband | inband}

Example:

User level: read-write, admin.
L You can only access this command in interface mode. 

Type interface [name] at the command prompt to enter interface mode.

L Use the enable vlans commands command before configuring VLAN-

oriented parameters, when there is more than one interface on the same VLAN.

The syntax for this command is:

Example:

outband

Enables the outband interface

inband

Enables the inband interface

C460-1# en interface inband 

This command will RESET the device

*** Reset *** - do you want to continue (Y/N)? Y

Attaching network interface lo0... done.

                 Welcome to C460

                SW version 1.0.1

Login:

Router-1(config-if:marketing)#enable vlan commands