Avaya P332MF Manual Do Utilizador

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

107

The

 set internal buffering 

command allows you to set the size (either 

Maximum or Minimum) of the Receive (Rx) buffer allocated to each port of the 
specified switch. This command is meaningless when any port of the switch is 
operating with flow control ON.

This command is not supported by P332G-ML and P332GT-ML switches.

The syntax for this command is:

set internal buffering <mod_num> {max|med|min}

Example:

P330-N> set internal buffering 1 max

Done.

Use the 

set boot bank

 command to configure the software bank from which the 

switch will boot at the next boot process. This command should be issued separately 
for each switch in the stack using the 

session

 command.

This command is not supported by the P333R and P333R-LB switches.

If this command is to be implemented on a switch other than the stack master, 

a session should be opened to the relevant switch.

The syntax for this command is:

set boot bank <value>

max

Sets the internal receive buffer to its maximum size.

med

Sets the internal receive buffer capacity dynamically

min

Sets the internal receive buffer to its minimum size (this is the 
Default).

value

{bank-a | bank-b}