Avaya P332MF Manual Do Utilizador
Chapter 6
CLI – Layer 2
110
Avaya P332MF User’s Guide
set port spantree priority
Use the
set port spantree priority
command to set the priority level of a
port. This value defines the priority of a port to be blocked in case two ports with
the same costs cause a loop.
the same costs cause a loop.
The syntax for this command is:
set port spantree priority [module/port] [value]
set port spantree cost
Use the
set port spantree cost
command to set the cost of a port. This value
defines which port will be allowed to forward traffic if two ports with different costs
cause a loop.
cause a loop.
The syntax for this command is:
set port spantree cost [module/port] [value]
module/port
The switch number/the port number.
value
Number representing the priority of the port. The priority
level is from 0 to 255, with 0 indicating high priority and
255 indicating low priority. A port with a lower priority
will be blocked.
level is from 0 to 255, with 0 indicating high priority and
255 indicating low priority. A port with a lower priority
will be blocked.
module/port
The switch number/the port number.
value
Number representing the cost. The cost level is set from 1
to 65535. A lower cost (lower value) specifies precedence
of a port to forward traffic.
to 65535. A lower cost (lower value) specifies precedence
of a port to forward traffic.